LANケーブル自作工具キット (7点セット) アイウィス｜IWISS 公式サイト from iwiss.co.jp
Introduction
Are you planning to make your own LAN cable? If yes, then you have come to the right place. Here we will guide you through the process of DIY LAN cable making and provide you with a list of tools required for the job.
Why DIY?
DIY is always fun and cost-effective. Making your own LAN cable will not only save you money but also give you the satisfaction of creating something useful with your own hands. In addition, you can customize the cable length and color according to your requirements.
Tools Required
Before we dive into the process, let's take a look at the tools required for making a LAN cable:
1. Cable
The first thing you need is a cable. You can buy a bulk cable and cut it according to your requirements. Make sure to choose a high-quality cable that can handle the required bandwidth.
2. RJ45 Connectors
RJ45 connectors are used to terminate the cable. Make sure to buy a good quality connector that can provide a solid connection.
3. Crimping Tool
A crimping tool is used to attach the RJ45 connector to the cable. Make sure to buy a good quality tool that can provide a strong crimp.
4. Cable Tester
A cable tester is used to check the connectivity and continuity of the cable. It is essential to ensure that the cable is working correctly.
The Process
Now that we have the tools, let's move on to the process of making a LAN cable.
Step 1: Cut the Cable
Cut the cable according to the required length. Make sure to leave some extra length for crimping and testing.
Step 2: Strip the Cable
Strip about an inch of the outer insulation from both ends of the cable using a wire stripper.
Step 3: Untwist the Pairs
Untwist the pairs and arrange them according to the T568A or T568B standard. Make sure to follow the same standard on both ends of the cable.
Step 4: Trim the Wires
Trim the wires to the required length using a wire cutter. Make sure to keep the wires straight and tidy.
Step 5: Insert the Wires into the Connector
Insert the wires into the RJ45 connector in the correct order. Make sure to push the wires all the way in.
Step 6: Crimp the Connector
Use the crimping tool to crimp the connector onto the cable. Make sure to apply enough pressure to get a solid connection.
Step 7: Test the Cable
Use a cable tester to check the connectivity and continuity of the cable. Make sure to test both ends of the cable.
Conclusion
Making your own LAN cable is a fun and cost-effective DIY project. With the right tools and a little bit of patience, you can create a high-quality cable that meets your requirements. So, go ahead and give it a try!
0 Response to "5+ Lan ケーブル 自作 工具 使い方 Ideas"
Posting Komentar