Must Know フェリングレバー使い方 Article

メルカリ STIHLスチールフェリングレバー【アウトドア】 (¥5,600) 中古や未使用のフリマ from item.mercari.com

Introduction

If you are planning to cut down a tree, it is important to know how to use a felling lever properly. A felling lever is a tool used to guide the tree to fall in the desired direction. In this article, we will discuss the proper technique for using a felling lever.

Choosing the Right Felling Lever

Before you start, make sure you have the right felling lever for the job. Choose a lever that is long enough to give you leverage, but not so long that it is difficult to control. The handle should be comfortable to hold and the head should be angled to provide a good grip on the tree.

Preparing the Tree

Before you start cutting, you need to prepare the tree. Clear the area around the tree of any obstacles and ensure that there is a clear path for the tree to fall. Make sure that there are no power lines, buildings or people in the way.

Starting the Cut

To start the cut, make a horizontal cut into the tree about one-third of the way through the trunk. Then make a downward cut at a 45-degree angle towards the horizontal cut. This will create a wedge that will guide the tree to fall in the desired direction.

Using the Felling Lever

Once you have made the wedge, use the felling lever to guide the tree in the desired direction. Place the lever behind the tree and push it in the direction you want the tree to fall. Use the lever to apply pressure to the tree and guide it along the path you have chosen.

Controlling the Fall

As the tree starts to fall, use the felling lever to control the speed and direction of the fall. If the tree starts to fall in the wrong direction, use the lever to push it back in the right direction. Be aware of your surroundings and make adjustments as necessary.

Finishing the Cut

Once the tree has fallen, finish the cut by removing the remaining stump. Cut the stump as close to the ground as possible to avoid any tripping hazards.

Safety Precautions

When using a felling lever, it is important to take safety precautions. Always wear protective gear, including a hard hat, eye protection, and sturdy boots. Make sure that the area around the tree is clear of any obstacles and that there are no people nearby.

Conclusion

Using a felling lever properly is essential for cutting down a tree safely and efficiently. By following these guidelines, you can ensure that your tree falls in the desired direction and that you stay safe throughout the process. Remember to always take safety precautions and to choose the right felling lever for the job.